Protecting Your Employees

« Back to Home

3 Points To Consider When Choosing a Hot Tar Hose

Posted on

When it comes to the safe and efficient transfer of hot tar, it is necessary to use a high-quality, durable discharge hose -- often referred to as a hot tar hose. Failure to choose carefully can lead to many issues, including leaks and even contamination of the tar mixture. This article will help ensure you know how to choose properly.


In terms of sizing, it's not only important to focus on the length of the hose; it is equally important that you be mindful of the diameter. In addition to any type of pumping aide you are using, the diameter of the hose will have an impact on the rate at which the tar is transferred through the hose, which will ultimately have an effect on your application.

Sit down and determine the job specifics and the requirements of your pump to choose the appropriately sized pump. Keep in mind that you may need to invest in more than one size of pump if your needs fluctuate.


Consider where you will predominately use the hose, such as indoors or outdoors. For the most part, all hot tar hoses have very high tolerances when it comes to the level of heat they can withstand. However, this is not always the case when it comes to colder temperatures. If you operate in an area that experiences harshly cold winters and the hose will be used outside, it is imperative that you choose a hose that can withstand low temperatures.

A hose that can't withstand low temperatures may crack when exposed to cold. All hoses will have a high and low maximum, so ensure you're reviewing this information to make certain it meets your needs.

Wand Compatibility

It's always a good idea to choose a wand-friendly hose. Unless you want to invest in several hoses, it is important to have the ability to switch out the wand on the hose based on your application needs.

Take a crack sealing and a spreading application, for instance. If you were to choose a hose that could only support a limited variety of wands, you may not be able to complete both these projects with the same hose. If you already have your wands on hand, it's a good idea to take the wands along with you to ensure each of your hoses fit.

It's always important for your business to make sure you carefully select your hot tar hose to get the most use out of your investment. Check with a reputable hose company like Copperstate Hose if you have any questions.